How It Works

The Capillus Red Light Therapy Panel houses 189 LEDs across four selectable light therapy modes. You sit facing the panel propped upright on its included leather case stand while specific wavelengths of light penetrate the skin to stimulate cellular activity, support collagen production, reduce inflammation, and target acne-causing bacteria.

The panel's display screen shows your current mode and the time remaining in your session. When the session ends, the panel sounds an alert and powers off automatically.

What's In The Box

Controls at a Glance

Charging Your Panel

The panel has a built-in 2000mAh rechargeable battery. Use only the included charge cable and a 5V-1A/2A power adapter connected to a standard AC 100–240V outlet.

Setup & Session Preparation

1. Set up the standOpen the protective leather case and use it to prop the panel upright on a flat surface at a comfortable angle facing you at roughly face height.

2. Cleanse your faceRemove all makeup and cleanse thoroughly. Avoid any products containing photosensitive or whitening ingredients (such as Vitamin C) before your session.

3. Remove metal itemsTake off regular glasses, contact lenses, necklaces, earrings, and any other metal jewelry before starting your session.

4. Have your glasses readyKeep the included light-blocking glasses within reach; you will need to put them on during the 5-second countdown before the LEDs activate.

How to Use

1. Power onLong-press the Power / Mode button. The panel will emit a prompt sound and begin a 5-second safety countdown.

2. Put on the light-blocking glassesDuring the 5-second countdown, put on the included glasses before the LEDs fully activate. Wear them for the entire session.

3. Select your modeShort-press the Power / Mode button to cycle to your desired mode (P01–P04). See the Light Modes section below to choose the right one for your goal.

4. Set intensityPress the Intensity button to choose from three brightness levels. Start at the lowest level if you are new to light therapy.

5. Set session timePress the Time button to adjust the duration if needed. The default times are P01: 17 min, P02: 25 min, P03: 20 min, P04: 20 min.

6. Begin your sessionSit facing the panel. Adjust the angle and distance based on your comfort and light sensitivity. The display counts down the remaining time.

7. Session ends automaticallyThe panel sounds an alert and powers off when time is up. Remove your glasses and proceed with your skincare routine.

Light Modes Guide

Short-press the Power / Mode button to cycle through the four modes. Each addresses a different skin concern.

Intensity Levels

Press the Intensity button to cycle through three brightness levels. Higher intensity settings default to shorter treatment times. Start lower and build up as your skin adjusts.

Usage Guidelines

Consistent daily use produces the best results. Gradually increase session length and intensity as your skin adjusts over the first few weeks.

The panel is designed for the face and neck but may also be used on other areas of the body by adjusting its position.

Care & Cleaning

1. After each sessionGently wipe the panel surface with the included soft cleaning cloth to maintain hygiene and protect the LED array.

2. No liquids or spraysDo not apply any liquid cleaners or sprays directly to the panel. The cloth wipe is sufficient.

3. Store away from heat and sunlightKeep in a cool, dry location protected from dust, moisture, and direct sunlight. Avoid freezing temperatures.

4. Do not place objects on the panelNever set items on top of the device or the LED surface; this can damage the array.

Safety & Contraindications

Please review the following before your first session.

Do not use if you have:

• Known light sensitivity or sun allergies (photosensitivity)
• A reaction to light sources
• Pregnancy
• Capillary disease caused by steroid hormones or liver dysfunction
• A mental disorder that may be affected by light stimulation

Before and during use:

• Always wear the included light-blocking glasses throughout each session
• Remove contact lenses, regular glasses, and all metal jewelry before each session
• Avoid skincare products with photosensitive ingredients (such as Vitamin C) before use
• Do not use in a bathroom or damp environment
• Stop immediately if you experience any discomfort, pain, or unusual skin changes

Downloads

Reference the full documentation for detailed specifications, warranty information, and troubleshooting.