How It Works

The Capillus MAT is designed to cradle the cervical area while 450 LEDs deliver red and near-infrared light therapy to the neck, shoulder, and upper back. The ergonomic neck support positions the LEDs in close contact with the treatment area, enabling consistent, hands-free sessions lasting up to 30 minutes.

The MAT delivers up to 132 mW/cm² of irradiance and offers three selectable pulse modes, all of which are controlled wirelessly via the included remote. It powers off automatically when your session ends.

What's In The Box

Setup & Powering On

The MAT runs on AC power; it has no internal battery. The wireless controller has its own rechargeable battery, which is charged separately via USB-C.

1. Charge the wireless controllerBefore first use, charge the remote controller by connecting a USB-C cable from its charging port to the power adapter.

2. Connect the MAT to powerPlug the large end of the power cord into the AC power adapter, then plug the adapter into a wall outlet. Connect the small end of the power cord to the power port on the top right of the MAT.

3. Inspect the MATBefore each use, check for cleanliness, cracks, sharp edges, or signs of corrosion. Do not use a damaged device.

4. Position the MATPlace the MAT so the built-in neck support cradles your cervical area while the LED lights align with your upper back and neck. Sit or recline comfortably.

5. Power on via remoteShort-press the on/off button on the wireless controller for 1.5 seconds to start your session.

Light Modes

Select your preferred mode using the wireless controller. All three modes deliver both 660nm red and 850nm near-infrared light simultaneously. The difference is the delivery pattern.

Use the up and down arrows on the remote controller to adjust light intensity within any mode.

Session Settings & Usage Guidelines

Sessions are adjustable from 5 to 30 minutes in 5-minute increments. The MAT auto shuts off when the programmed time ends.

Care & Cleaning

1. Disconnect all cables before cleaningTurn off the MAT and unplug the power cord completely before wiping it down.

2. Wipe with a damp clothGently clean the surface with a soft, damp cloth. Do not apply excessive pressure.

3. No solvents or chemicalsDo not use acetone, alcohol, bleach, or any other chemical cleaners. These permanently damage the MAT and void the warranty.

4. Keep dryDo not use or store the MAT in a bathroom or near water. If it gets wet, do not plug in or use it — contact support.

5. Store at room temperatureStore between 32°F and 77°F (0°C–25°C) in a clean, dry location. Indoor use only — do not store or use outdoors.

Safety & Contraindications

Do not use if you have:

• Retinal or macular disease, ocular albinism, or any eye condition causing light sensitivity
• Body implants near the treatment area
• Lack of sensation or numbness in the neck or shoulder area
• A light-sensitive skin disorder (such as lupus or porphyria)
• Light-induced headaches
• Albinism or melasma
• Sensitivity or allergy to plastic, aluminum, or self-fastening materials
• A photosensitizing medication or skincare product in your routine

Do not use if any of the following are present in the treatment area:

• Recent surgery (until cleared by your physician)
• Suspicious lesions or skin cancer
• Eczema or psoriasis
• New, irregularly shaped, or changing brown spots or birthmarks
• Broken skin, rash, or blisters
• Tissue inflammation
• Active skin infection, cold sore, or warts
• Active herpes simplex outbreak, or history of herpes without preventative treatment
• Recent dermatological treatment where skin has not fully healed (neurotoxin, filler, microneedling, laser, chemical peel)

Downloads

Reference the full documentation for detailed specifications, warranty information, and troubleshooting.