How It Works

The Capillus HairBand delivers Low-Level Light Therapy (LLLT) to the scalp using 82 medical-grade 650nm laser diodes embedded in a flexible comfort band with soft hair-parting teeth. The adjustable design lets you target the hairline, crown, or top of the head by repositioning the band before each session.

The HairBand is designed as a scalp wellness device for general personal care; it is not intended to diagnose, treat, cure, or prevent any disease or medical condition. Sessions are 5 minutes, three times per week, and the device emits no heat, no harmful radiation, and requires no drugs or topical applications.

What's In The Box

Charging the Battery Controller

Full charge takes approximately 1.5 hours. Once charged, the battery supports up to 8 hours of use. Do not use the device while it is charging.

1. Connect the cable to the controllerPlug the USB-C cable into the charging port on the Smart Magnetic Battery Controller.

2. Connect to powerPlug the USB end into the included power adapter, then into a wall outlet.

3. Watch the indicatorThe power indicator light turns red while charging and turns off when the battery is fully charged.

4. Disconnect before useUnplug the charging cable before attaching the controller to the hairband and starting a session.

Scalp Coverage Positions

Adjust the band's position on your head before each session to target the area where you want to focus treatment.

How to Use

1. Inspect before useCheck the hairband for cleanliness, cracks, or sharp edges. Verify the battery controller is charged.

2. Attach the Smart Magnetic Battery ControllerAlign the controller with the magnetic connection interface on the hairband. Bring them close together until they snap into place automatically. The device will only operate when the controller is securely attached.

3. Position the band on your headPlace the hairband on your head and adjust so the laser emitters are directed at your desired scalp area, hairline, top, or crown. The hair-parting teeth help seat the device against the scalp.

4. Start your sessionPress and hold the Power Button on the controller for approximately 1 second. A confirmation beep will sound and the lasers will activate. The 5-minute session begins automatically.

5. Relax hands-free for 5 minutesThe band can be worn while reading, relaxing, or doing other seated activities. The device shuts off automatically when the session ends. To stop early, press the Power Button, or simply detach the magnetic controller to instantly cut power.

Usage Guidelines

Care & Cleaning

1. Turn off and detach the controllerPower off the device and detach the battery controller before cleaning.

2. Wipe with a soft, slightly damp clothClean the hairband and controller gently. A mild soap solution may be used if needed.

3. Allow to dry completelyLet all parts air dry fully before storing or using again.

4. No harsh chemicalsDo not use alcohol, bleach, abrasive cleaners, or any chemical solvents.

5. Store in the storage bagKeep in the included IP22-rated bag between sessions to protect from moisture and dust.

Safety & Contraindications

Do not use if you have:

• Retinal or macular disease, ocular albinism, or any light-sensitivity eye condition
• A light-sensitive skin disorder (lupus, porphyria)
• Light-induced headaches, albinism, or melasma
• Suspicious lesions, skin cancer, eczema, or psoriasis on the scalp
• Broken skin, rash, blisters, active infection, cold sores, or warts on the scalp
• A recent scalp treatment that has not fully healed (neurotoxin, filler, microneedling, laser, chemical peel)
• A photosensitizing medication or skincare product in your routine

Downloads

Reference the full documentation for detailed specifications, warranty information, and troubleshooting.