How It Works

The Capillus EyeLift delivers 685nm red light therapy directly to the under-eye area via LEDs on the device's interior surface. At this wavelength, light energy penetrates below the skin's surface to stimulate cellular activity supporting collagen production and reducing the appearance of fine lines and wrinkles over time.

Each session lasts exactly 10 minutes. The device auto shuts off when your session is complete; no timer needed.

What's In The Box

Charging Your EyeLift

A full charge takes approximately 3 hours. Only use the provided USB-C cable to charge your device.

1. Connect the adapterPlug the large end of the USB cable into the power adapter, then plug the adapter into a wall outlet.

2. Connect to devicePlug the USB-C end of the cable into the charging port on the bottom right of the EyeLift.

3. Charge fullyAllow approximately 3 hours for a complete charge before first use.

4. Disconnect when doneUnplug the adapter and disconnect the cable once charged.

How to Use

1. Inspect the deviceBefore each use, check for cracks, sharp edges, or signs of corrosion. Do not use a damaged device.

2. Cleanse your faceGently remove all makeup, dirt, and oil before your session. The device works best on clean, bare skin.

3. Position the devicePlace the EyeLift under your eyes, ensuring a comfortable fit against the skin.

4. Power onShort press the on/off button for 1.5 seconds to start your session. The device will begin delivering red light therapy immediately.

5. Relax for 10 minutesThe device will automatically power down at the end of your session. Stay still and relaxed — you do not need to hold the button or do anything further.

Usage Guidelines

Daily use is recommended for best results. Most users begin to see visible improvement in the appearance of fine lines and wrinkles within several weeks of consistent use.

Note: Discontinuing use may result in the gradual return of fine lines and wrinkles over time. Consistent long-term use is key to maintaining results.

Care & Cleaning

1. Disconnect all cables firstMake sure the device is off and unplugged before cleaning.

2. Wipe with a damp clothGently clean the inner surface with a soft, damp cloth. Do not apply excessive pressure.

3. No solvents or chemicalsDo not use acetone, alcohol, bleach, or any other chemical cleaners. These will permanently damage the device and void your warranty.

4. Keep dryDo not use or store near water, in the bathroom, or in humid environments. If the device gets wet, do not use or charge it.

5. Store safelyKeep in a cool, dry location between 32°F and 77°F (0°C–25°C) when not in use.

Safety & Contraindications

Please review the following before your first session.

Do not use this device if you have:

• Retinal or macular disease, ocular albinism, or any eye condition causing light sensitivity
• Extreme light sensitivity of the eyes or light-induced headaches
• Implants in the face
• Lack of sensation or numbness in the treatment area
• A light-sensitive skin disorder (such as lupus or porphyria)
• Albinism or melasma
• Sensitivity or allergy to plastic, aluminum, or self-fastening materials

Do not use if any of the following are present on your face:

• Recent facial surgery (until cleared by your physician)
• Suspicious lesions or skin cancer
• Eczema or psoriasis
• New, irregularly shaped, or changing brown spots or birthmarks
• Broken skin, rash, blisters, or tissue inflammation
• Active skin infection, cold sore, or warts
• Active herpes simplex outbreak (cold sores), or history of herpes without preventative treatment
• Facial treatment where skin has not fully healed (neurotoxin, filler, microneedling, laser, chemical peel)

Consult a physician before use if you:

• Are taking photosensitizing medications or using photosensitizing skincare products
• Have bruising on the face
• Are experiencing skin sensitivity or irritation from retinol or benzoyl peroxide

Downloads

Reference the full documentation for detailed specifications, warranty information, and troubleshooting.