How It Works

The Capillus BODY is a flexible, wearable LED belt with 360 diodes that deliver two therapeutic wavelengths simultaneously to any targeted area of the body. Red light supports surface-level cellular activity, while near-infrared light penetrates more deeply to reach muscles and tissue underneath, creating favorable conditions for recovery, circulation, and everyday tension relief.

Each 15-minute session delivers a gentle warming experience. The device auto shuts off when your session is complete.

What's In The Box

Charging Your BODY Device

A full charge takes between 1 and 4 hours. Always use the provided USB-C cable and power adapter do not substitute with other chargers.

1. Connect the adapterPlug the USB-C cable into the power adapter, then plug the adapter into a wall outlet.

2. Connect to the devicePlug the USB-C end into the charging port on the device.

3. Monitor the indicatorThe LED indicator turns red while charging. When charging is complete, the indicator turns off.

How to Use

1. Inspect before each useCheck the device for cracks, sharp edges, or signs of corrosion. Do not use if the device appears damaged.

2. Position on the target areaPlace the BODY device directly against the skin on the area you want to treat back, shoulder, knee, hip, or any other area. Use the elastic strap to secure the device in place for hands-free use.

3. Power onPress the button once to turn all LEDs on. Your 15-minute session starts immediately.

4. Relax for 15 minutesThe device will auto shut off at the end of your session. If any area feels too warm or discomfort occurs, press the button once to power off immediately.

5. Move to another area if desiredAllow the device to cool fully before repositioning to a different body area and starting a new session.

Usage Guidelines

The Capillus BODY is designed for frequent, targeted use across multiple areas of the body in a single day.

Care & Cleaning

1. Power off and unplug firstTurn off the device and disconnect from any power cable before cleaning.

2. Clean the fabric surface onlyWipe the device body and elastic strap gently with a damp cloth or soft brush. Do not clean or press directly on the LED panels.

3. No solvents or harsh chemicalsDo not use acetone, alcohol, bleach, or abrasive cleaners. These will damage the device and void your warranty.

4. Air dry out of direct sunlightAllow to dry completely before storing or using again.

5. Store flat — do not foldKeep on a flat surface. Do not bend, fold, or place heavy objects on top of the device.

Safety & Contraindications

Please review the following before your first session.

Do not use if you have:

• Retinal or macular disease, ocular albinism, or any eye condition causing light sensitivity
• A light-sensitive skin disorder (such as lupus or porphyria)
• Light-induced headaches
• Albinism or melasma
• A photosensitizing medication or skincare product in your routine

Do not use on any area of the body where:

• There are suspicious lesions or skin cancer
• Eczema or psoriasis is present
• There are new, irregularly shaped, or changing brown spots
• The skin is broken, has an open wound, rash, or blisters
• There is tissue inflammation
• There is an active skin infection, cold sore, or warts
• There is an active herpes simplex outbreak, or history of herpes without preventative treatment
• A dermatological treatment has not fully healed (neurotoxin, filler, microneedling, laser, chemical peel)

Downloads

Reference the full documentation for detailed specifications, warranty information, and troubleshooting.